Complete Electric Fan Conversion Shroud Kit

A complete, ready-to-install custom electric fan mounting solution for your Classic Mini radiator. Choose between a printed physical kit shipped to your door, or a digital download if you'd rather print it yourself. Designed to work specifically with the 280mm/11in Revotec Comex Suction fan.

What's Included:

• Radiator Shroud – printed in PPA-CF-Core for heat resistance and long-term rigidity in the engine bay
• Wheel Well Fan Mount – printed in ABS for a lightweight, durable fit
• Rivnuts – sized and included for secure, permanent mounting points
• Mounting Screws – matched hardware for a clean bolt-up install

Not Included:

• Revotec Electric fan - https://revotec.com/product/9-0-225mm-high-power-fan/

Material Notes:
The radiator shroud is printed in PPA-CF-Core to handle the direct heat and mechanical stress near the radiator core. The wheel well fan mount uses ABS, offering solid durability at a lower cost since it sees less direct heat exposure. 

Delivery Times:
Depending on current stock of filaments, this can take up to 2 weeks print before shipping

Fitment Notes:
This kit is intended for off-road, track day, and non-street use only — it is not designed, tested, or warrantied for daily on-road driving. It was built around a specific fan, radiator, and mounting geometry and is not a universal fit. Compare your setup against the vehicle shown in this video before ordering, and confirm this use case matches your intended application.

⚠️ Safety Disclaimer:
Always verify clearance from moving parts, belts, and pulleys before final installation, and confirm all fasteners are properly torqued and secure before use. Improper mounting can result in fan or shroud failure, which may cause engine damage or a safety hazard. This is an aftermarket, user-installed part intended for off-road/track use only — install at your own risk, and consult a qualified mechanic if you're unsure about fitment or installation.

Warranty:
These are one-off, low-volume printed parts made to order. As with all custom 3D-printed components, Classic Mini DIY offers no warranty on fit, function, or durability. Parts are sold as-is and intended for off-road/non-street use — please inspect thoroughly before installation and reach out with fitment questions prior to purchase.